PRODUKTE

Versorgungsbehälter / Pumpen

PVA10G

PVA10G Ten Gallon Stainless Steel Pressure Vessel Assembly

Material Tanks

PVA10G

Ten Gallon Stainless Steel Pressure Vessel Assembly

The PVA10G stainless steel pressure tank assembly has a fully removable lid allowing material to be poured into the tank or have an entire bucket placed inside. The PVA10G features quick connect fittings and shutoff valves on the air inlet and fluid outlet.

The PVA10G stainless steel pressure tank assembly has a fully removable lid allowing material to be poured into the tank or have an entire bucket placed inside. A disposable polyethylene liner can be used to keep the tank walls clean. Once the lid assembly is placed onto the tank, a series of clamps will hold the assembly in place. The PVA10G features quick connect fittings and shutoff valves on the air inlet and fluid outlet.

The PVA10G has many integrated features including:

  • UV safe, ASME certified enclosure
  • 110 psi air safety relief valve
  • Grounding wire
  • Available 1” FNPT gravity feed port on bottom of tank
  • Optional material agitator, heating system, low level detection, vacuum assembly, and check valve for bottom of dip tube


PVA10G SPECIFICATIONS

Inside Dimensions
356 mm x 406 mm
(14 in diameter x 16 in depth)

Outside Dimensions
406 mm x 838 mm
(16 in diameter x 33 in high)

Pressure Tank Body Construction
304 stainless steel

Pressure Tank Lid Seal
Santoprene

Wetted Components
304 stainless steel, 316 stainless steel, polypropylene disposable liner

Maximum Tank Volume
37 liters (9.8 gallons)

Inline Material Filter
Standard 450 micron

Pressure Regulator
Standard 0-60 psi

Share/Bookmark