PRODUKTE

Anlagen für Selektives Conformal Coating

Unsere Anlagen verbinden die Prozesssteuerung über einen geschlossenen Kreislauf mit einem hohen Präzisionsgrad und Wiederholbarkeit für den Einsatz in Produktionsumgebungen mit großen volumina.

Systems

Delta 6 Selective Coating / Dispensing System
Delta 6  Selective Coating / Dispensing System
The Delta 6 is a new, reimagined flexible robotic conformal coating/dispensing system that is ideal for selective coating, potting, bead, and meter-mix dispensing applications.
Delta 8 Selective Coating / Dispensing System
Delta 8  Selective Coating / Dispensing System
The Delta 8 is a robotic selective conformal coating/dispensing system, providing maximum work area flexibility to perform a wide variety of applications.
PVA350 Benchtop Selective Coating / Dispensing System
PVA350  Benchtop Selective Coating / Dispensing System
The PVA350 is a flexible three or four-axis robot that is suitable for virtually any benchtop or laboratory selective coating and automated dispensing application.

Valves

FCM100 Non-Contact Micro Dispensing Valve
FCM100  Non-Contact Micro Dispensing Valve
FCS300-ES Extended Spray Valve
FCS300-ES  Extended Spray Valve
The FCS300-ES Extended Spray Valve provides a repeatable, concentrated coating film in a fine, circular pattern widths ranging from 0.125” to 0.5”.
FCS300 Spray Valve
FCS300  Spray Valve
The FCS300 Spray Valve provides a repeatable, concentrated coating film in pattern widths ranging from 0.25” to over 2”. The atomized spray process resulting from the FCS300 will produce conical (round cap) or fan-shaped (flat cap) patterns with transfer efficiencies in excess of 99%.
FC100-C4 Non-Atomized Flow Coating Valve
FC100-C4  Non-Atomized Flow Coating Valve
The FC100-C4 Flow Coating Valve produces a sharp, non-atomized stream of low viscosity fluids and coatings.
FC100-CF Film Coating Valve
FC100-CF  Film Coating Valve
The FC100-CF Film Coating Valve produces a sharp, non-atomized stream of low viscosity fluids and coatings. The resulting precise application process is ideal for solvent based chemistries requiring wet film builds of at least 0.008”.
FC100-MC Stainless Steel Dispensing Valve
FC100-MC  Stainless Steel Dispensing Valve
The FC100-MC is a versatile dispensing valve for single-component bead, dot, potting, or encapsulation projects.
Share/Bookmark